GSM Solar Alarm Operation Instructions
Min.Order : 1 Pieces Quick Quotation >
Item Details
Product Description
?GSM solar alarm operation instructions
1?illustration
2?Function
1?beautiful, delicate, waterproof structure;
2?microcomputer intelligent control, stable performance, first-class quality;
3? GSM SMS programming, SMS control, 20 wireless defense;
4? GSM SMS, remote control and control of cloth, garrison operations;
5? "learning" operation with wireless detector;
6?built in rechargeable lithium battery, solar charging;
7? with anti tamper alarm function;
3?Technical
1?Static current:<40;Alarm current:<220mA
2?Back-up battery: 3.7v 4400ma / h
3?The solar charging current: 330mA
4?Continuous cloudy standby time: =5 days
5?Electricity charge: 110 ~ 240VAC, USB 5V, charge time: =8 hours
6?the longest sound and light alarm time: 1 minutes.
7?receiving distance: =150 meters (open area)
8?alarm volume: =105db.
9?Receivingfrequency: 433MHz
10?2-Band GSM: GSM900/1800Mhz
11?Learning to match: up to 20 wireless detectors
12?Product dimension:262×204×61(mm)
4?Operation using
a?Use of preparatory work before:
1, install the SIM card: SIM card will be valid SIM card is inserted accurately;
2, connect the power: Connect the mains power supply and turned on, the alarm "beep" sound, while warning light flashes 4 times, the green lights flash for a few seconds and then slowly GSM flash into standby mode;
3, check the host GSM signal strength is sufficient:
GSM signal is normal | Signal malfunction or SIM card is not inserted |
Green GSM signal lights flash once interval of about one second | GSM signal green light does not shine or flash signal search |
b?modify the password settings: Edit "888,888 + 9 + # + # six new password" message content sent to the alarm, the alarm "beep" sound after the reply SMS "set successfully", said the success of password changes ; Note: The factory setting is "888888";
c?operation using:
1?Armed
Remote control: press the remote protection key, warning lights flashing 1 times, while the alarm beep sound after 5 successful;
SMS: Edit "password + 1" Content SMS sent to alarm, the alarm after the "beep" at reply message "System Armed";
Note: a, remote protection automatically delay 5 seconds in defense state; without delay GSM SMS;
b, in defense state after the alarm lamp is about 1 times every 3 seconds flash;
2?Disarm:
Remote Control: Click the disarm button on the remote control, alarm, "beep, beep" twice, while warning lights flash twice, disarm success;
SMS: Edit "password + 0" Content SMS sent to the alarm, the alarm "beep, beep" after at reply message "System Disarmed";
3, Alarm state:
The deployment of state supporting the trigger detector, immediately alarm the high decibel alarm warning lights, strobe.
Note: the alarm the longest 1 minutes, then resume automatic alarm state; or disarm operation automatic recovery standby;
4, GSM short message emergency alarm: Edit "password + 8" texting to alarm, alarm message is received immediately after the high decibel alarm, warning strobe lights.
At the same time reply message "System Alarm";
5?change the configuration of wireless detectors operate
Increased configuration:
1, standby mode, click "learn" button, warning lights long bright;
2, the trigger twice to configure the remote control or wireless detectors, warning lights flash five times off, the configuration of learning success; If warning light does not shine directly off, school failure, re-operation;
Note: a, be increased to configure operation, you can only operate the remote control or configure a wireless detector;
b, each alarm can be connected with up to 20 remote control or wireless detectors;
Deletion configuration: standby mode, long press the "learn" button for 5 to 10 seconds after the release, after the warning light will flash off, the deletion of success;
Note: When the deletion operation, will all have to learn to configure the remote control or wireless infrared detector delete all out;
6?the initial password recovery
In standby mode, press and hold the "learn" button for 12 seconds and release the buzzer long "beep -" five seconds, password recovery success;
Note: The initial password is 888888
7?tamper alarm: the energized state will immediately remove wireless alarm alarm;
8?the battery voltage indicator: the deployment of state, when the warning lights stop flashing every 3 seconds, said the battery voltage is low;
Payment & Shipping
More Product
Recommend Product